Three-plunger crank pumping T, PT type

Certificates

The T and PT three-plunger crank units and pumps are designed to pump both neutral liquids and aggressive liquids, which are neutral to the materials of the hydraulic portion, with the kinematic viscosity of not more than 800 mm2/sec (8 St) at a temperature depending on the make of 243 K to 473 K (minus 30°С to plus 200°С). The allowed level of nonabrasive solid particles in the pumped fluid is not more than 0.2 % w/w; the allowed particle size is not more than 0.2 mm.

Fill in the process datasheet

Certifications

Temperature, °С	from −30 to +200
Flow rate at max plunger stroke, l/h	from 0,16 to 20
Discharge pressure, MPa	from 2,5 to 100

These pumps and units are used in operations that require use of high pressures including explosion- and fire-risk ones (for instance, hydraulic cleaning of manufacturing equipment). They are also used as feeding pumps in movable steam-generating plants.

Pump type	Feeding, m3/h	Pressure in pump outlet, MPa
1.1 PT-25	1,0 (min)—3,2 (max)	10
1.3 Т-32-2,7	3,2 (min)—5,0 (max)	40
1.3 PT- 50	8,0 (min)—20 (max)	16
1.3 Т-28-2,7	2,5 (min)—4,0 (max)	50
2.3 PT-25	1,25 (min)—3,2 (max)	10
2.3 PT-36	2,5 (min)—6,3 (max)	10
2.3 PT-45	4,0 (min)—10,0 (max)	10
2.3 PT-1/40	1	40
2.3 PT-1,6/25	1,6	25
2.3 PT-2,5/16	2,5	16
2.3 PT-4/10	4	10
2.3 PT-6,3/6,3	6,3	6,3
2.3 PT-10/4	10	4
2.3 PT-12,5/2,5	12,2	2,5
1.3 PT-10/20	10	20
1.3 Т-6,3/20	6,3	20
1.3Т-12,5/10	12,5	10
1.3 Т-12,5/16	12,5	16
1.3 Т -16/16	16	16
1.3 Т -4/16	4	16
1.3 Т -20/10	20	10
ANP 4/63	3,5	63
ANP 5/63	4,5	63
ANP 6/50	6	50
UPG 4/16	6	10
UPG 6/10	4	16

Опросные листы

Сертификаты

Температура, °С	от −30 до +400
Плотность, кг/м³, не более	1050
Концентрация механических примесей, %, не более	0,2
Величина зерна твердой неабразивной фазы, мм, не более	0,2
Содержание серы в несвободном состоянии, %, не более	3,5
Содержание парафина, %, не более	3,5